Post Offer Free
Suzhou Bellaid lighting co.,ltd  

Gold Index: 6766

You are here: home  > High brightness 50W Flat LEDPanel Light 60 x 60 with Suspended Mounted

High brightness 50W Flat LEDPanel Light 60 x 60 with Suspended Mounted 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: AIA-1

   60 x 60cm 50W  LED Flat Panel Lighting  for home , hotel , office,hospital, high grade application. 

 
 
 60 x 60cm 50W  LED Flat Panel Lighting  for home , hotel , office,hospital, high grade application.
 
 
Description:
 
Bellaid flat LED panel is a well-designed & easy to retrofit replacement for standard ceiling tile fittings( ceiling troffer fixture )widely used in offices,hospitals and other professional locales.
Our company LED panel has an outstanding luminous efficacy of 95lm/w achieved by utilizing ultra-bright SMD leds in tandem with Japanese-design reflective materials.
Thanks to its good sink design , Bellaid LED panel has unbelievable low in situation temperature 33,Calculated LM70 lifetime is 66,000h.
 
 
Product Specifications:
 
Construction & materials:
 

Actual Dimension

595*595mm(23.43*23.43inch

Housing

Extrusion aluminum and Diffused PMMA optical lens.

Finish color

White and silver

Lens type

Frosted

Retrofit

Yes

 
Environmental system
 

Work environment

Indoor use ( application for dry environment)

Operating temperature

-2050

Mercury (mg)

0

 
Optical system
 

Luminous flux

3800lm @ 4000K, 4000lm @ 6000K

Color temperature

4000K & 6000K is best seller.

CRI

82 for 4000K, 83 for 6000K

Spacing criteria

C0/180:1.26;C90/270:1.23

Lumen maintence at 6000h

95%

Lumen Maintenance Factor at Lifetime

0.75

Rated peak candelas(cd)

4000K @ 1300; 6000K @ 1450

Emergency Luminous Flux (lm) 

1200LM @ 1/3 wattage

 
Electrical system
 

Input voltage/Current

100-2770Vac;220-240Vac,50/60Hz

Off state power

0

Power consumption

50W

Power Factor

0.98

THD

15%

Protection

Class II driver,  Class III panel
IP20 real/IP40 front

Dimmable

No

Switching Cycles

50000

Start Time (s)

0.35

Warm-up time to 60% (s)

Instant full light

 
 
Features
 
Save up to 60% energy usage compared to traditional fluorescent fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free
                                       
Photometric Information
 
 
                  4000K                                                                                           6000K  

 
 
Distribution curve flux:
 

 
 Illuminance demo:
 

User Guide Note:
 
Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.
 
 
Unpacking
 

  • Unpack and careful examine the product.
  • Report any damage and save all packing material if any parts were damaged during transportation
  • Do not attempt to use this apparatus if it is damaged.

Installation instructions
 
 
1)  Pls remove the protection film on the front of luminaire

  • Consult a qualified electrician to ensure correct branch circuit conductor.
  • The products should be installed and operated by qualified electrician or technician in accordance 
  • with relevant local codes.
  • Rish of electric shock,ensure that main power source is off when wiring or soldering the sections of
  •  the product.

Maintenance

  • Prior to cleaning the product,make sure it has been disconnected from power supply.
  • Use a dry or slightly moistened cloth for cleaning
  • Never use any chemical or abrasive materials for cleaning.

Installation considerations

  • The product must be at a minimum distance of 20cm from any flammable material.
  • The product must not be installed into ceilings or wall that contain heat-insulating materials.

Installation steps

  • Built-in
  • Turn off main power before wring.
  • Remove the ceiling panel
  • Connect the input and ground wires(bare end) of the driver box to the main power outlet.
  • Connect male-female connector tightly on the panel and driver.
  • Fix the flat led panel into the ceiling.

bigPhoto
 Mr. Li

Tel: 86-512-66209587
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

Suzhou Bellaid lighting co.,ltd [China (Mainland)]


Business Type:Manufacturer
City: Suzhou
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like:

Product (141)